During this already active hurricane season, the American Architectural Manufacturers Association (AAMA) will host a webinar about lessons learned from 2017’s Hurricane Irma, which primarily impacted Florida. AAMA will host Chris Matthews, Vice President and Senior Consultant of GCI Consultants, as he speaks about glazing system performance during Hurricane Irma. Observations from hundreds of inspections conducted from the Northeast to the Southeast to the Southwest of Florida will be shared. Register now for “Hurricane Irma | Lessons Learned,” taking place at 11:30 a.m. Eastern on Thursday, September 27. This complimentary presentation is sponsored by AAMA’s Southeast Region and is open to the public.
“The takeaways from the aftermath of Hurricane Irma are even more important now in the midst of another storm season,” said Dean Ruark, President of the AAMA Southeast Region and Director of Product Management at PGT Innovations. “We are committed to getting the latest possible information out to our membership about how to best prepare in the future.”
“AAMA knows hurricane preparedness is a critical issue to those in the industry,” said Janice Yglesias, AAMA Executive Vice President. “Our webinar seeks to share important information from Chris about what was learned in Florida in the aftermath of Hurricane Irma.”
About the Speaker
Matthews is Vice President and a Senior Consultant, employed with GCI Consultants since 2002. He has more than 25 years of experience working with exterior glazing and wall systems and specializes in the installation and water resistance of these systems. He has consulted with owners, architects, engineers, insurers and builders on hundreds of projects throughout North America and the Caribbean and serves as an expert witness in related matters. He has worked extensively in the construction of new projects and the investigation and correction of existing structures with performance problems. Matthews is a graduate of the University of Florida, a certified Exterior Insulation and Finish System (EIFS) inspector, a Certified Building Commissioning Professional and a member of various industry organizations. He has published articles in several trade periodicals and made many accredited presentations to other industry professionals.